EMT Practice Test

1. Question Content...

---

Question1: You are establishing an IP Fabric where your QFX10002-72Q spine devices are connecting to leaf devices. Each leaf is a Virtual Chassis comprised of ten EX4300s.
What is the maximum number of leaf devices supported in this scenario?

Question2: Which two statements are correct when performing a unified ISSU? (Choose two.)

Question3:
VMs on Server-1 and Server-2 are on the same Layer 2 domain within a VCF and are sending traffic to each other.
Referring to the exhibit, which three criteria are used when load-balancing traffic? (Choose three.)

Question4: You created an IP Fabric based on IBGP. You noticed that ECMP load sharing is not working.
In this scenario, what is the problem?

Question5: You are deploying 50 QFX5100 switches in your data center. You are asked to explain the benefits of using ZTP during your deployment of these devices.
What is a benefit of this deployment?

Question6:
Referring to the exhibit, R1 and R2 are QFX5100s and are acting as VXLAN Layer 2 Gateways for VLAN
100 using PIM-SIM signaling. R1 currently has an entry for Host B in its MAC table.
What will R1 do in response to receiving the ARP packet from Host A?

Question7: You are having management connectivity problems with a mixed-mode Virtual Chassis.
Which statement is correct in this scenario?

Question8:
You are attempting to deploy a VCF as shown in the exhibit. SW-1 and SW-2 are functioning as the spine devices and SW-3 and SW-4 are functioning as the leaf devices. However, the VCF is not functioning properly.
Which two actions would solve this problem? (Choose two.)

Question9: In a preprovisioned mixed Virtual Chassis, which statement is correct about converting a 40Gbps QSFP+ to a Virtual Chassis port in an EX4300?

Question10:
Referring to the exhibit, a failure has occurred and the original VCF has split into two separate VCFs. The VCF associated with SW-1 is active and the VCF associated with SW-3 is inactive.
In this scenario, why are the two VCFs in these states?

Question11: Your server administrator asks you to preserve the inner VLAN tags of the frames coming from a Layer 2 VXLAN Gateway of the EVPN-enabled segment.
Which two parameters must you add to the configuration to allow the VLAN tag to be passed? (Choose two.)

Question12: Which three BGP messages pass EVPN information between devices? (Choose three.)

Question13:
Referring to the exhibit, R1 and R2 are QFX5100s and are acting as VXLAN Layer 2 Gateways for VLAN
100 using PIM-SM signaling. R2 currently has only the (*.G) state established for VNI 5100.
Which event will cause R2 to establish the (S,G) state for VNI 5100 using R1 as the multicast source?

Question14: You want to converse IP address space and reduce your fabric management overhead. For these reasons, you decided to use unnumbered Ethernet interfaces for your IP Fabric.
Which statement is correct in this scenario?

Question15: You are deploying an IP Fabric in your new data center. You need to ensure that your servers have multiple active/active links for redundancy and load balancing.
What are two methods to accomplish this goal? (Choose two.)

Question16:
The exhibit shows an output from a QFX5100 Series switch serving as an MC-LAG peer.
Which two statements are true in this scenario? (Choose two.)

Question17: You are asked to design a deployment plan for a large number of QFX Series switches using zero touch provisioning (ZTP). The ZTP deployment plan must ensure all switches are upgraded to the desired software version.
Which DHCP option are suboption combination would be used to accomplish this task?

Question18:
Referring to the exhibit, VMs on Server-1 are sending traffic to VMs on Server-2. All VCPs in the VCF have
40Gbps of bandwidth available and automatic fabric trunking is bundling multiple VCPs together.
Which statement is correct in this scenario?

Question19: You are building a mixed-mode Virtual Chassis with two QFX5100-24Qs, four QFX3500-48s, two EX4600-
40Fs and two EX4300-48Ts. The Virtual Chassis will not provision.
In this scenario, which statement is correct?

Question20:
The MC-LAG group shown in the exhibit is providing high availability services for the directly connected servers.
Where does Juniper Networks recommend you provide the backup liveness detection?

Question21:
The VCF shown in the exhibit is not functioning correctly.
What must you do to get the VCF to function properly?

Question22: You are developing an EVPN service between your data centers to enable Layer 2 stretch and Virtual Machine Traffic Optimization (VMTO) operations.
In this scenario, which action must be performed on the IRB interface to accomplish this task?

Question23:
You are deploying MC-LAG as shown in the exhibit.
Which statement is correct when using active/standby mode?

Question24:
Referring to the exhibit, R1 and R2 are QFX5100s and are acting as VXLAN Layer 2 Gateways for VLAN
100 using PIM-SM signaling.
What will cause R2 to send a (*.G) PIM Join towards the RP?

Question25: What is the endpoint of a VXLAN tunnel?

Question26:
Referring to the exhibit, which two MAC addresses are learned from the local side of the MC-LAG link?

Question27:
Referring to the exhibit, PE1 and PE2 are acting as MPLS Layer 3 VPN PEs to provide the DCI between DC1 and DC2, which are IP Fabrics. Leaf 1 and Leaf 2 are QFX5100 Series devices acting as VXLAN Layer 2 Gateways using EVPN signaling for the same VXLAN segment.
Which statement is correct about the Edge1 device in this scenario?

Question28: What are two methods used to scale an IBGP IP Fabric? (Choose two.)

Question29:
Referring to the exhibit, R1 and R2 are QFX5100 Series devices acting as VXLAN Layer 2 Gateways using PIM-SM signaling for the same VXLAN segment (VNI 5100). The multicast group assigned to VNI 5100 is
239.0.0.1. R1 currently has an entry in its MAC table for Host B.
In this scenario, how will R1 react to receiving the Ethernet frame from Host A?

Question30: You are deploying a spine-and-leaf IP Fabric in your data center using EBGP.
In this scenario, which three statements are true? (Choose three.)

Question31:
Referring to the exhibit, what is the MAC address of the IRB interface on router PE1?

Question32:
Referring to the VCF shown in the exhibit, what is the remote destination trunk weight for the SW-4, SW-1, SW-5 path?

Question33: An EX9200 switch is acting as a Layer 3 VXLAN gateway.
In this scenario. which action will allow you to communicate between two VLANs?

Question34:
Spine 1 and Spine 2 are MX Series devices configured to act as redundant VXLAN Layer 3 Gateways using the virtual-gateway-address 10.0.1.254statement,
Referring to the exhibit, how will a spine node react to receiving the ARP request from Host A?

Question35:
You are deploying a VXLAN using EVPN signaling overlay network. PE1 and PE2 are multihomed to the connected CE device. You notice that the traffic is not load-balancing as expected.
Referring to the exhibit, which two actions will solve this problem? (Choose two.)